Sale!

Hiden Camera Pin Hole IP

$ 199.00 $ 169.00

  • H.264/MJPEG
  • 3.2mm@F2.5 Lens
  • Concealed mirror camera
  • 12V DC 80mA
  • Get lower price when you buy two or more.
SKU: pinhole-camera Category:

Description

Specifications:

 

Camera
Image Sensor:|1/4″ progressive scan CMOS
Min. Illumination:|0.01Lux @(F1.2,AGC ON) ,0 Lux with IR
0.028Lux @(F2.0,AGC ON) ,0 Lux with IR
Shutter time:|1/3 s to 1/100,000 s
Lens:|3.2mm@F2.5, Angle of view: 65°
Day& Night:|IR cut filter with auto switch
Wide Dynamic Range:|Support
Digital noise reduction:|3D DNR
Compression Standard
Video Compression:|H.264/MJPEG
Video bit rate:|32Kbps~8Mbps
Image
Max. Image Resolution:|1280 × 720
Frame Rate:|50 Hz: 25 fps (1280 x 720), 25 fps (704 x 576), 25 fps (640 x 480)
60 Hz: 30 fps (1280 x 720), 30 fps (704 x 576), 30 fps (640 x 480)
Image Settings:|Rotate mode, Saturation, Brightness, Contrast adjustable by client software or web browser
BLC:|Yes, zone configurable
ROI:|Support
Network
Network Storage:|NAS (Support NFS,SMB/CIFS)
Alarm Trigger:|Line Crossing, Intrusion Detection, Motion detection, Dynamic analysis, Tampering alarm, Network disconnect , IP address conflict, Storage exception
Protocols:|TCP/IP,ICMP,HTTP,HTTPS,FTP,DHCP,DNS,DDNS,RTP,RTSP,RTCP,
PPPoE,NTP,UPnP,SMTP,SNMP,IGMP,802.1X,QoS,IPv6,Bonjour
Security:|One-key reset, Flash-prevention, dual stream, heartbeat, mirror, password protection, privacy mask, watermark, IP address filtering, Anonymous access
System Compatibility:|ONVIF, PSIA, CGI, ISAPI
Interface
Communication Interface:|1 RJ45 10M / 100M Ethernet interface
General
Operating Conditions:|-30 °C ~ 60 °C (-22 °F ~ 140 °F)
Humidity 95% or less (non-condensing)
Power Supply:|12VDC ± 10%
Power Consumption:|3W MAX
Dimensions:|37.3×41.4×24.3
Weight:|55g(0.12lbs)

Reviews

There are no reviews yet.

Be the first to review “Hiden Camera Pin Hole IP”

Your email address will not be published. Required fields are marked *