Remote Access Security Cameras

View CCTV Cameras Remote Access

With Owl Video Security Cameras Remote Access Configuration Service and Router Programming, you don’t need to have a Static IP address to maintain your remote configuration as we will use a dedicated service that refreshes your IP address every time it changes, holding this way the connection for unlimited time.

What comes with our Remote Programming Service?

 

 . You won’t need a Static IP address from your Service Provider

Public IP addresses dynamically change unless you pay $15 to $25 a month for a static IP address otherwise, your Public IP will change in an unpredictable time to a different Address braking that way the original link that your DVR was programmed with.

 . Access Inside and outside of your Property

In many cases, your installer left your system configured in a way that you are only able to see your cameras just locally. We are going to properly configure your router to have remote viewing access anytime anywhere you go as long there is an internet carrier signal at both ends.

 . No recurrent Payments or Contracts, just one-time programming fee.

Our expert IT Configuration service will set up your DVR and Cameras the right way from the beginning so you will be Up and Before before we finish our connection.

 . 1 Year no questions ask warranty to re-program your access if you lose it.

Make sure you still have the same physical setup ( Wires, and Router ) as we work with when we originally configured your cameras.

 

Are you ready to see your cameras remotely?

Four Steps easy preparation.

Just Make Sure your DVR has the following installation specs.

  1. Internet Speed Connection
    go to  speedtest.net ( Wait for the page to load, and hit the button that says “BEGIN TEST“), the second automated step will show your Internet’s speed, MAKE SURE YOUR Upload Speed, is at least, 1.5Mbps.
  2. Connect DVR to Internet Router
    Physical Ethernet connection from your router to DVR LAN port is a most. Use a UTP cat 5 or Cat 6 Patch cord long enough to physically connect your main internet router and your DVR’s ethernet port.
  3. Administration Passwords
    Make sure to have handy your DVR’s admin, and Router’s login access password (Locate them in the labels at the back of your router).
  4. Computer Connection to Local Network
    Your DVR must be connected to your Main router provided from your phone company, avoid connecting your DVR to any second router in your local network.

Once you have those above steps ready we will need to establish a remote computer session, please check the steps to it below.

Remote DVR Configuration

If you are ready with the previous steps, now we need to establish remote access configuration between your computer, and our’s, to do this you need to download TeamViewer Software, ( Choose the link that says For the instant customer: TeamViewer QuickSupport ) download, and install the software, and have ready TEAM VIEWER’S  ID, and Password.

You are just a call away to See your Cameras From your Phone

You don’t need a static IP or Pay monthly fees!

Call us now 954-727-3945

Schedule a Service

Send us your Phone and time you would like us to get in contact.

8 + 8 =

 Not sure if your DVR will get connected?

Most DVRs are capable of handling remote connectivity, but there are some minimum requirements to make it possible. If you have a very old System, and you’re afraid, or your technician told your that your DVR has no available app for remote viewing, Don’t Worry! we have Compatible DVRs with Older Surveillance Systems that will solve the remote access problem without changing your whole system, and will also enhance viewing and recording resolution of old cameras.